||Chemical Dosing Pump – XI Series
||IX-C: 1000 cps IX-D: 300 cps
||73 to 247 PSI
||0-50 ° C (TC, tipo TE), 0-80 ° C
||80 GPH (300 L / H) to 0.02 GPH (7.5m L / H).
Featuring four great pump series, EZ, EWN, EHE, and EJ, E Series metering pumps are powered by advanced microprocessor-based electronics and superior mechanical design. With capacities up to 20 GPH (76 l/h) and pressures to 290 psi (20 bar), E Series has a pump that will fit most any industrial, municipal, or agricultural water or wastewater application. And, the entire E Series pump line is backed with a comprehensive 2-year warranty that covers the entire pump, including the liquid end and diaphragm.
The EJ Series provide precise chemical injection at an economical price. Universal voltage capability enables operation from 100 – 240VAC in virtually all countries. The EJ Series are compact, simple to operate and have outputs to 3.2 GPH (12.0 LPH) and a maximum pressure of 175 PSI (1.2 MPa).
High Speed Performance
The EJ Series operate at 360 strokes-per-minute, providing high resolution chemical feed and high turndown capability. Most competitive products operate at slower speeds, resulting in slug feeding, accelerated diaphragm wear and poor feed control.
The Universal Voltage Function enables the EJ Series to operate at any AC voltage. The EJ Series also conform to global Standards.
The EJ Series have both digital input and Stop/Start inputs built into the pump, enabling either proportional or On/Off control.
IP65 Equivalent Protection
A robust housing protects the pump from normal wear. Mounting the Digital Display and Key Pad control within the drive housing creates a highly water resistant design. A clear cover further protects the pump from liquids.